If you need to record data from an auto or other vehicle - truck, motorcycle, boat, airplane or recreational vehicle - we have several models of data loggers that are perfect for these applications. They can measure many common parameters such as temperature, voltage, pressure and force along with specialized information from on-board networks such as CAN bus.
Automotive Data Loggers
- dataTaker DT80 Series - Up to 15 Inputs with USB, Serial and Ethernet Interfaces
- dataTaker DT800 - Up to 42 Inputs with Ethernet and Serial Interfaces
- CANgate - CAN to Serial converter
- Grant Squirrel SQ2020/SQ2040 - Up to 32 Inputs with USB Interface
- KineticSystems DAQ400/ DAQ500 Series - High Speed with up to 64 Inputs and Ethernet InterfaceNimtech
- FrontDAQ - High Speed with 20 Inputs and an A/D per channel
CANgate CAN-to-Serial Converter
 |
| The CANgate is a compact CAN-to-serial gateway that can be used in combination with the dataTaker DT80 or DT800 data loggers to capture CAN data along with other analog and digital signals. It features 2 CANbus interface ports plus a serial GPS input. It supports standard protocols including ISO-15765-2 and SAE-J1939. More detailed information is available in the CANgate Datasheet. |
General Purpose Data Loggers and Dat Acquisition Systems for Auomotive Applications
dataTaker DT80 Series |
dataTaker DT800 |
dataTaker DT50 Series |
The DT80 series data loggers have ±30-Volt input range with a built-in display and a USB memory slot for easy data transfer. The DT80 Series are stand-alone data loggers that connect to a PC via Ethernet, USB, or RS-232. |
The DT800 data logger is has 12 to 42 analog input channels, 16 digital channels, and 1 serial sensor channel. The DT800 stores up to 130,000,000 data points and has an ATA Flash card slot for removable data storage. |
The DT50 series data loggers have up to 5 low-voltage input channels that are suitable for thermocouple, RTD or thermistor measurements. The DT50 series data loggers also have digital and counter inputs, stores up to 130,000 points in internal memory, and require an RS-232 port for connection to a PC. |
| DT80 |
5 to 15 analog inputs, 12 digital channels, 1 serial sensor channel |
|
DT50 |
5 to 10 analog inputs, 5 digital channels, 3 counter channels, SRAM PC Card slot for Removable Data Storage |
| DT81 |
1 to 3 analog inputs, 4 digital channels, 4 counter channels |
DT51 |
1 to 3 analog inputs, 4 digital channels, 3 counter channels |
dataTaker DT500/DT600 Series |
Grant Squirrel SQ2020/SQ2040 Series |
KineticSystems DAQ500/DAQ700 Series |
The DT500/DT600 series data loggers have 10 to 30 analog input channels with 4 digital channels and 3 counter channels. Each store up to 1,390,000 data points and have an SRAM PC card slot for removable data storage. |
The Grant Squirrel SQ2020/SQ2040 series data loggers are capable of sub-second logging and concurrent sampling. With 16 MB of internal memory, the Grant Squirrel SQ2020/SQ2040 series data loggers can log approximately 1,000,000 to 2,000,000 readings that can be downloaded to a removable MMC memory card. Inputs can be used with thermistor, thermocouple and RTD temperature sensors and 4-20mA instruments. |
The portable KineticSystems DAQ400/DAQ500 Series data loggers have 4 to 64 channels that are compatible with most thermocouple types. The KineticSystems DAQ400/DAQ500 Series data loggers can interface to a PC or operate standalone, and stores data on a removable CompactFlash™ card. It supports sample rates of up to 50-kHz aggregate. |
| DT500 |
±2.5 V Input Measurement Range |
SQ2020-1F8 |
Up to 16 analog inputs with a single ADC |
DAQ432 |
32 Input channels with programmable gain and 4 kHz aggregate sample rate |
| DT505 |
±100 V Input Measurement Range |
SQ2020-2F8 |
Up to 16 analog inputs with two ADC's |
DAQ464 |
64 Input channels with programmable gain and 4 kHz aggregate sample rate |
| DT600 |
±2.5 V Input Measurement Range, with built-in display |
SQ2040-2F16 |
Up to 32 analog inputs with two ADC's |
DAQ504 |
4 Input channels with programmable gain and 50 kHz aggregate sample rate |
| DT605 |
±100 V Input Measurement Range, with built-in display |
SQ2040-4F16 |
Up to 32 analog inputs with four ADC's |
DAQ516 |
16 Input channels with fixed gain and 50 kHz aggregate sample rate |
| |
|
|
|
DAQ518 |
18 Input channels 16 with fixed gain, 2 with programmable gain and 50 kHz aggregate sample rate |
| |
|
|
|
DAQ532 |
32 Input channels with fixed gain and 50 kHz aggregate sample rate |
Nimtech FrontDAQ |
The Nimtech FrontDAQ data logger has 20 analog input channels, 20 digital channels and 4 analog outputs. The Nimtech FrontDAQ data logger can sample at 7.7 kHz per channel and store data to CompactFLASH™ memory. The Nimtech FrontDAQ data logger is network-ready and incorporates an internal web server for setting up and viewing data. |
| |
  
ADwin Real-Time Data Acquisition and Control Systems |
| ADwin systems are designed for high speed data acquistion and control applications where deterministic operation is critical. They offer multiple analog input channels with sample rates up to 1.5 MHz, analog output channels, digital input and output channels along with serial and CAN bus interfaces. They can be configured to operate standalone or in combination with a computer via either USB or Ethernet communication interfaces. ADwin systems are available in 3 styles: ADwin-Light-16, ADwin-Gold and ADwin-Pro. |
| ADwin-Light-16 |
8 Analog input channels, 2 analog output channels, 6 digital in, 6 digital out, 2 counters optional digital expansion, CANbus and counter expansion modules. |
| ADwin-Gold |
16 Analog input channels, 2 analog output channels, 32 digital I/O channels, optional analog output expansion, and counter modules. |
ADwin-Pro |
Modular system with up to 480 analog input channels, 480 digital I/O channels, thermocouple or RTD inputs, analog outputs, counters, serial, CAN, LIN and ProfiBus communication interfaces |
|
