We offer a several data loggers that are suitable for measurement of digital signals; either digital state, pulse count or digital events. The are models that are specifically designed for voltage/current measurements only. They typically are lower cost and are easier to set-up but offer less flexibility. We also have a great selection of general purpose data loggerers that can measure DC voltages and 4-20 mA signals and also allow the measurement of other input signals types.
Digital Data Loggers
- Dedicated Digital Data Loggers
- TandD RVR-52A - 1 Inputs Wireless
- dataTaker DT53 - 4 Digital State Inputs plus 3 Counter Inputs
- Eltek GS4x - Wireless
- General Purpose Data Loggers suitable for voltage or current measurements
- dataTaker DT80 Series - Up to 15 Inputs with USB, Serial and Ethernet Interfaces
- dataTaker DT800 - Up to 42 Inputs with Ethernet and Serial Interfaces
- dataTaker DT50 Series
- dataTaker DT500/DT600 Series - Up to 90 Inputs with Serial Interface
- Grant Squirrel SQ2020/SQ2040 - Up to 32 Inputs with USB Interface
- Nimtech FrontDAQ - High Speed with 20 Inputs and an A/D per channel
- Infinite Informatics iLOG Series - 4 Inputs with a Serial, Ethernet or GSM Interface
Dedicated Digital Data Loggers
TandD RVR-52A |
dataTaker DT53 |
Eltek |
| The RVR-52A data logger is a compact, water-resistant, wireless, temperature and humidity logger with a range of 0°C to 50 °C, and 10% to 95% RH. This compact logger can store up to 16,000 data points and connects to a PC through the RTR-57U Wireless Data Collector, the RTR-5W Wireless Data Collector, or the RTR-50 Wireless USB Base Station/Repeater |
The TR-72 Series data loggers are compact temperature and humidity loggers with a range of -60°C to 155 °C, and 10% to 95% RH that can store up to 16,000 data points |
Eltek offer wireless transmitters and receivers for digital state, event or counter inputs
|
| |
|
GS-60 - 2 Digital state inputs |
| |
|
GS-61 - 8 Digital state inputs |
| |
|
GS-62 - 2 Pulse inputs up to 250 Hz |
General Purpose Data Loggers suitable for voltage or current measurements
dataTaker DT80 Series |
dataTaker DT800 |
dataTaker DT50 Series |
The DT80 series data loggers have ±30-Volt input range with a built-in display and a USB memory slot for easy data transfer. The DT80 Series are stand-alone data loggers that connect to a PC via Ethernet, USB, or RS-232.
|
The DT800 data logger is has 12 to 42 analog input channels, 16 digital channels, and 1 serial sensor channel. The DT800 stores up to 130,000,000 data points and has an ATA Flash card slot for removable data storage.
|
The DT50 series data loggers have up to 5 low voltage input channels that are suitable for thermocouple, RTD or thermistor measurements. It also has digital and counter inputs. The DT50 series stores up to 130,000 points in internal memory, has a serial interface for connection to a PC.
|
| DT80 |
5 to 15 analog inputs, 12 digital channels, 1 serial sensor channel |
|
DT50 |
5 to 10 analog inputs, 5 digital channels, 3 counter channels, SRAM PC Card slot for Removable Data Storage |
| DT81 |
1 to 3 analog inputs, 4 digital channels, 4 counter channels |
DT51 |
1 to 3 analog inputs, 4 digital channels, 3 counter channels |
dataTaker DT500/DT600 Series |
Grant Squirrel SQ2020/SQ2040 Series |
Infinite Informatics iLOG Series |
The DT500/DT600 series data loggers have 10 to 30 analog input channels with 4 digital channels and 3 counter channels. Each store up to 1,390,000 data points and have an SRAM PC card slot for removable data storage.
|
The Grant Squirrel SQ2020/SQ2040 series data loggers are capable of sub-second logging and concurrent sampling. With 16 MB of internal memory, the Grant Squirrel SQ2020/SQ2040 series data loggers can log approximately 1,000,000 to 2,000,000 readings that can be downloaded to a removable MMC memory card. Inputs can be used with thermistor, thermocouple and RTD temperature sensors and 4-20mA instruments.
|
The iLOG series data loggers have 4 analog input channels and 4 digital channels 2 of which can be configured as counters. The iLOG series data loggers incorporate an internal web server with FTP and email support which makes it ideal for remote logging applications. |
| DT500 |
±2.5 V Input Measurement Range |
SQ2020-1F8 |
Up to 16 analog inputs with a single ADC plus 8 digital inputs |
iLOG-EDM
|
Serial port interface for external modems |
| DT505 |
±100 V Input Measurement Range |
SQ2020-2F8 |
Up to 16 analog inputs with two ADC's plus 8 digital inputs |
iLOG-GSM |
Built-in GSM/GPRS modem |
| DT600 |
±2.5 V Input Measurement Range, with built-in display |
SQ2040-2F16 |
Up to 32 analog inputs with two ADC's plus 8 digital inputs |
iLOG-LAN |
Ethernet interface for network connectivity |
| DT605 |
±100 V Input Measurement Range, with built-in display |
SQ2040-4F16 |
Up to 32 analog inputs with four ADC's plus 8 digital inputs |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Nimtech FrontDAQ |
|
The Nimtech FrontDAQ data logger has 20 analog input channels, 20 digital channels and 4 analog outputs. The Nimtech FrontDAQ data logger can sample at 7.7 kHz per channel and store data to CompactFLASH™ memory. The Nimtech FrontDAQ data logger is network-ready and incorporates an internal web server for setting up and viewing data.
|
|
| |
|
|
