TandD RTR-5x Series |
| The RTR-5x series data loggers are compact, water-resistant, wireless, temperature loggers. Each compact logger can store up to 16,000 data points and connects to a PC through the RTR-57U Wireless Data Collector, the RTR-5W Wireless Data Collector, or the RTR-50 Wireless USB Base Station/Repeater |
| RTR-51 |
Internal temperature sensor with a range of -40°C to 80°C |
| RTR-52 |
External temperature sensor with a range of -60°C to 155°C |
| RTR-53 |
Temperature and humidity logger with a range of 0°C to 50 °C, and 10% to 95% RH. |
| RVR-52 |
Voltage/current logger with a range of 0 V to 6.5 V or 0 20 mA. |
| RTR-57U |
Handheld Wireless Data Collector |
| RTR-5W |
Wireless Network Data Collector |
| VLD for Windows |
Secure Software for RTR-5 Series |
|
 
Eltek GenII Telemetry Systems |
| The GenII telemtry systems supports up to 128 transmitter units and 250 channels with expandable storage for up to 2,000,000 readings. The 100SC receiver works in conjuction with DARCA secure software to provide a tamperproof audit trail with encrypted data files and secure login to meet the needs for CFR21 Part 11 reporting. In addtion, a wide variety of transmitters are available to meet almost every need. |
| DARCA Secure - Secure data storage software |
Eltek GenII Transmitter Modules |
| GC-05 |
Built-in temperature sensor |
| GC-10 |
Built-in temperature and humidity sensor |
| GS-13 |
External temperature and RH |
| GS-21 |
Socket for 1 K/T thermocouple |
| GS-24 |
Sockest for 4 K/T thermocouple |
| GS-31 |
Socket for 1 thermistor |
| GS-32 |
Sockets for 2 thermistors |
| GS-34 |
Sockets for 4 thermistors |
| GS-38 |
Sockets for 8 thermistors |
| GS-41 |
Socket for 1 V/C input |
| GS-42 |
Sockets for 2 V/C inputs |
| GS-44 |
Sockets for 3 V/C inputs |
| GS-51 |
Socket for 1 4-wire RTD |
| GS-52 |
Sockets for 2 4-wire RTD |
| GS-61 |
Sockets for 7 event inputs |
| GS-62 |
Sockets for 2 (voltage free) pulse inputs |
| GL-70 |
Built-in temperature, humidity, visible light, and UV light |
|
Veriteq VL Series Validatable Loggers |
| The Veriteq Validatable VL Series data loggers along with the vLog software provide an easy-to-use and cost-effective method for validating
temperature and humidity-sensitive equipment, systems, and processes in
FDA / GMP pharmaceutical environments. Complete end to end packages including a detailed loggers, software, calibration and a detailed validation protocol are available. |
| Veriteq Temperature and Humidity Mapping Data Sheet |
| Veriteq Validatable Data Loggers |
| VL-1000 |
1 Temperature input with range of -40°C to 85°C with an accuracy of ±0.15°C |
| VL-2000 |
1 Temperature input with range of -40°C to 85°C with an accuracy of ±0.15°C and 1 humidity input with a range of 0 to 95% RH with ±2%RH |
| VL-1000-LT |
1 Low temperature input down to -86°C |
|
VR18 Paperless Chart Recorder |
| With 6 plug and play I/O slots for up to 18 channels of analog inputs or a mix of analog input, digital input, analog output or digital output, a 6.1 inch real-time display and a slot for Compact Flash storage, the VR18 is a good choice when real-time data display is needed along with CFR21 reporting. |
| CFR Compliance Information - Guidance on the use of VR18 for CFR 21 record keeping |
